單項(xiàng)選擇題

It is a Rule requirement that the Owner should advise LR of any damage which may affect the classification of a ship and that all repairs necessary for the ship to retain her class are carried out to the satisfaction of the Surveyors. In which circumstances, the Owner/Master may not necessary report to the classification?（）

A、Portside anchor lost
B、Starboard auxiliary engine broken down
C、Fresh water cock in Kitchen found drip leaking
D、Cargo hold hopper plating cracked by grab

你可能感興趣的試題

單項(xiàng)選擇題

Under regulation 6(2) of MARPOL Annex VI, ships constructed before 19 May 2005 shall be issued with the IAPP Certificate no later than the first scheduled dry docking after 19 May 2005, but in no case later than 19 May 2008. Ships flying the flag of a State which is not a Party to MARPOL Annex VI and which do not carry an IAPP Certificate after the above dates should be treated in accordance with chapter 3 of these Guidelines. Which deficiency listed below may not cause the detention of the vessel by PSC inspection?（）

A、Absence of valid IAPP Certificate, EIAPP Certificates or Technical Files
B、A diesel engine, with a power output of more than 130 kW, which is installed on board a ship constructed on or after 1 January 2000, or a diesel engine having undergone a major conversion on or after 1 January 2000, which does not comply with the NOx Technical Code
C、the sulphur content of any fuel oil being used on board exceeds 4.5% m/m
D、An incinerator installed on board the ship before 1 January 2000 does not comply with requirements contained in appendix IV to the Annex, or the standard specifications for shipboard incinerators developed by the Organization (resolutions MEPC.76(40) and MEPC.93(45))

單項(xiàng)選擇題

Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

A、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.
B、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 3,5 kgf/cm2. The nozzle diameter is not to be less than 5mm.
C、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 4,0 kgf/cm2. The nozzle diameter is not to be less than 8mm.
D、This is to be carried out at a maximum distance of 2,0m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.

97免费在线观看视频,亚洲综合自拍网,黄色毛片免费观看,热久久综合网,免费看日产一区二区三区 狠狠操av,久久久涩涩涩,在线精品免费视频,人人插天天干,久久91精品国产91久久

你可能感興趣的試題

Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

97免费在线观看视频,亚洲综合自拍网,黄色毛片免费观看,热久久综合网,免费看日产一区二区三区狠狠操av,久久久涩涩涩,在线精品免费视频,人人插天天干,久久91精品国产91久久