- 搜標題
- 搜題干
- 搜選項
Refer to the exhibit. When applying this hierarchical policy map on the on the tunnel1 interface, you measure high jitter for traffic going through class 1234. What is the most likely cause of this jitter?（）
A.The configuration of a hierarchical policy map on a tunnel interface is not supported.
B.Class 5555 and class 5554 are both taking up 100% of the bandwidth，leaving nothing for class 1234.
C.The burst size for the traffic shaping is wrongly configured to 15000；this would require an interface capable of sending at 150Mb/s.
D.The burst size for the traffic shaping has been wrongly configured；it should be set as low as possible.
E.The burst size for the traffic shaping has been wrongly configured；it should be set as high as possible.
你可能感興趣的試題
【簡答題】
在R2的BGP里面：network 198.16.0.0/16 network 10.1.1.0/19 network 10.1.1.0/24.在R1上要求只收：10.1.1.0/19的路由。請選擇在R1上面的哪個配置是正確的：
1.access-list 100 permit ip 10.1.0.0 0.0.0.255 host 255.255.224.0
Router bgp 1
Distribute-list 100 in
2.access-list 10 permit 10.1.0.0 0.0.31.0
